Joints in aluminum, brass and pvc

Isoplam® joints in aluminum, brass and pvc are available in different thicknesses and are indispensable for creating architectural cuts on floors in ItalianTerrazzo exposed aggregate paving, polished ItalianTerrazzo, microterrazzo Terrazzoverlay, concrete resin Microverlay and low thickness pastina smooth Overlay. Isoplam Plam Profil profiles create a decorative separation profile in indoor and outdoor environments, which resists high loads and frequent passages.

The polished profiles in aluminum or natural brass can be used as decorative profiles for polished floors. The punched flanges allows any optimal coupling in the environment, internal or external, with a guarantee of durability to mechanical and chemical stresses. 

Code	Size	Features
P550001	H=3mm - L=2700mm	Aluminum with punched flanges Plam Profil aluminum Isoplam is a technical profile designed for the separation, closure and finishing in the installation of low thickness floors such as Microverlay, microcement, cement resin and cement resins in general. It is also widely used as a separation profile, finishing profile, protection of external edges and decoration between floors made of heterogeneous materials such as ceramic, wood, parquet, marble, granite, concrete... It is made up of an L-shaped natural aluminum bar, equipped with punched flanges which ensures attachment to the support and subsequent covering. The profile can be glued to the support with Plam Plaster Isoplam epoxy adhesive.
P550002	H=6mm - L=2700mm	Polished aluminum with punched flanges Plam Profil sandable Isoplam is a technical profile designed for separation, closure and finishing in the installation of sanded "Venetian" type floors in Terrazzoverlay, Terrazzoverlay XL or Pavilux Overlay Sanded Isoplam. The smoothable joint also acts as a perimeter delimiting element of the casting fields of the above-mentioned systems and constitutes a control and contraction joint. It is also widely used as a separation profile, finishing profile, protection of external edges and decoration between floors made of heterogeneous materials such as ceramic, wood, parquet, marble, granite, concrete... It is made up of a sandable bar in natural aluminum or natural brass L-shaped, equipped with punched flanges that ensures attachment to the support and subsequent covering. The profile can be glued to the support with Plam Plaster Isoplam epoxy adhesive.
P550003	h=20mm - L=2700mm	Polished brass with punched flanges Plam Profil sandable Isoplam is a technical profile designed for separation, closure and finishing in the installation of sanded "Venetian" type floors in Terrazzoverlay, Terrazzoverlay XL or Pavilux Overlay Sanded Isoplam. The smoothable joint also acts as a perimeter delimiting element of the casting fields of the above-mentioned systems and constitutes a control and contraction joint. It is also widely used as a separation profile, finishing profile, protection of external edges and decoration between floors made of heterogeneous materials such as ceramic, wood, parquet, marble, granite, concrete... It is made up of a sandable bar in natural aluminum or natural brass L-shaped, equipped with a punched flanges that ensures attachment to the support and subsequent covering. The profile can be glued to the support with Plam Plaster Isoplam epoxy adhesive.
G060002	H=20mm - L=2500mm	Pvc with thin light gray flanges The joints for architectural flooring in washed stone are expansion profiles composed of a non-toxic vinyl resin structure and an expansion part in soft vinyl resin. They are equipped with small flanges that guarantee anchoring. The elastic fractionating joints in plastic are also used for laying glue for tiles. The vinyl resin part protects the edges even in case of vehicular traffic with rubber wheels, while the dilating part, in soft vinyl resin, is resistant to fungi, bacteria and UV rays. They have a visible surface of 8 mm. The profile can be glued to the support with Plam Plaster Isoplam epoxy adhesive.
G060004	H=20mm - L=2500mm	Pvc with thin dark gray flanges The joints for architectural flooring in washed stone are expansion profiles composed of a non-toxic vinyl resin structure and an expansion part in soft vinyl resin. They are equipped with small flanges that guarantee anchoring. The elastic fractionating joints in plastic are also used for laying glue for tiles. The vinyl resin part protects the edges even in case of vehicular traffic with rubber wheels, while the dilating part, in soft vinyl resin, is resistant to fungi, bacteria and UV rays. They have a visible surface of 8 mm. The profile can be glued to the support with Plam Plaster Isoplam epoxy adhesive.
G060001	h=20mm - L=2500mm	Pvc with light gray perforated flanges The joints for architectural flooring in washed stone are co-extruded expansion profiles made up of a structure in shock-resistant non-toxic vinyl resin and an expansion part in soft vinyl resin. They are equipped with punched flanges that guarantee anchoring to the support and correct movement. Plastic joints are also used for laying tiles. The vinyl resin part protects the edges even in case of vehicular traffic with rubber wheels, while the dilating part, in soft vinyl resin, is resistant to fungi, bacteria and UV rays. They have a visible surface of 10 mm. The profile can be glued to the support with Plam Plaster Isoplam.
G060003	h=20mm - L=2500mm	Pvc with dark gray perforated flanges The joints for architectural flooring in washed stone are co-extruded expansion profiles made up of a structure in shock-resistant non-toxic vinyl resin and an expansion part in soft vinyl resin. They are equipped with punched flanges that guarantee anchoring to the support and correct movement. Plastic joints are also used for laying tiles. The vinyl resin part protects the edges even in case of vehicular traffic with rubber wheels, while the dilating part, in soft vinyl resin, is resistant to fungi, bacteria and UV rays. They have a visible surface of 10 mm. The profile can be glued to the support with Plam Plaster Isoplam.